| Displacement Cover End (cu in/revolution) | 45.0 LB |
| Rotation | Flange Mount |
| Mounting | Right Hand (CW) |
| Manufacturer Part No. | 2520VQ17A8-11DC20 |
| GPM @ 1,800 rpm, Cover End | 2 1/2 |
| GPM @ 1,800 rpm, Shaft End | Flange |
| Integral Valve Configuration | N/A |
| Mounting Flange | Standard Pilot |
| Major Diameter [Min | 0.875 in |
| Minor Diameter | 13 Tooth Splined |
| Shaft Dia. | 2520VQ |
| Major Diameter [Max | 1 3/8 in |
| Weight | Buna-N |
| Spline Description | 2500 |
| Shaft End Flow @ RPM | 0.715 in |
| Port Orientation - Cover End | SAE B, 2 Bolt |
| Displacement Shaft End (cu in/revolution) | Single Shaft Seal |
| Pilot Type | 16/32 |
| Pressure Port Size, Cover End | 2700 |
| Shaft Type | 2500 |
| Shaft Seal Type | N/A |
| Relief Valve Setting | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Controlled Flow Rate | 0.873 in |
| Pressure Port Size, Shaft End | 0.872 in |
| Seal Material | N/A |
| Cover End Pressure [Max | N/A |
| Port Orientation - Shaft End | N/A |
| Minor Diameter [Min | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Port Size | 2520VQ17A8-11DC20 |
| Model No. | 3000 |
| Minor Diameter [Max | 3000 |
| Cover End Flow @ RPM | 12 |
| Shaft Key | 25.5 |
| Pump Series | w/o Integral Valves |
| Max. RPM [Max | Outlet 45° CW from Inlet |
| Shaft End RPM [Max | Outlet 90° CW from Inlet |
| Shaft Length | 3/4 in Flange |
| Cover End RPM [Max | 1 in Flange |
| Shaft End Pressure [Max | 1.67 |
| Port Type | 3.37 |
