7.087 Inch | 180 Millimeter x 12.598 Inch | 320 Millimeter x 2.047 Inch | 52 Millimeter SKF NJ 236 ECMA Cylindrical Roller Bearings
How do 190 mm L you find the 7.087 Inch | 180 Millimeter x 12.598 Inch | 320 Millimeter x 2.047 Inch | 52 Millimeter SKF NJ 236 ECMA Cylindrical Roller Bearings specification? Manufacturers Online Free BEARING MEXICO,S.A.DE C.V. 7.087 Inch | 180 Millimeter x 12.598 Inch | 320 Millimeter x 2.047 Inch | 52 Millimeter check！
What is NJ 236 ECMA bearing interchange？
| Brand Name: |
SKF |
| Model Number: |
NJ 236 ECMA |
| Pump Series: |
30.0 LB |
| Manufacturer Part No.: |
Flange Mount |
| Max. RPM [Max: |
Right Hand (CW) |
| Seal Material: |
V2010-1F7S2S-11DD12 |
| Displacement Shaft End (cu in/revolution): |
1.4 |
| Pilot Type: |
Flange |
| Port Type: |
N/A |
| Weight: |
N/A |
Product Details
| Pump Series |
30.0 LB |
| Manufacturer Part No. |
Flange Mount |
| Max. RPM [Max |
Right Hand (CW) |
| Seal Material |
V2010-1F7S2S-11DD12 |
| Displacement Shaft End (cu in/revolution) |
1.4 |
| Pilot Type |
Flange |
| Port Type |
N/A |
| Weight |
N/A |
| Shaft Type |
0.875 in |
| Shaft Dia. |
13 Tooth Splined |
| Rotation |
V2010 |
| Major Diameter [Max |
1.3125 in |
| Shaft Seal Type |
Double |
| Model No. |
Buna-N |
| Shaft Length |
3000 |
| Shaft End Flow @ RPM |
0.728 in |
| Minor Diameter |
SAE B, 2 Bolt |
| Shaft Key |
Single Shaft Seal |
| Cover End Flow @ RPM |
16/32 |
| Shaft End RPM [Max |
3000 |
| Major Diameter [Min |
3000 |
| Relief Valve Setting |
N/A |
| Controlled Flow Rate |
2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Mounting |
0.873 in |
| Spline Description |
0.872 in |
| Minor Diameter [Max |
0.734 in |
| Cover End Pressure [Max |
0.723 in |
| Shaft End Pressure [Max |
N/A |
| Mounting Flange |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
V2010-1F7S2S-11DD12 |
| Cover End RPM [Max |
2500 |
| Port Size |
2500 |
| GPM @ 1,800 rpm, Cover End |
3 |
| GPM @ 1,800 rpm, Shaft End |
10.5 |
| Integral Valve Configuration |
N/A |
| Port Orientation - Cover End |
Outlet 135° CW from Inlet |
| Port Orientation - Shaft End |
Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End |
1/2 in SAE O-Ring |
| Pressure Port Size, Shaft End |
3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) |
0.4 |