2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter SKF 7312DU Angular Contact Ball Bearings
How do 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter you find the 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter SKF 7312DU Angular Contact Ball Bearings BEARING MEXICO,S.A.DE C.V. specification? Manufacturers Online Free 100 mm L check！
What is 7312DU bearing interchange？
| Brand Name: |
SKF |
| Model Number: |
7312DU |
| Weight: |
30.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Minor Diameter: |
Left Hand (CCW) |
| Shaft Type: |
V2010-6F13S4S-11CC12L |
| Cover End RPM [Max: |
1.5 |
| Shaft End Flow @ RPM: |
Flange |
| Cover End Pressure [Max: |
N/A |
| Controlled Flow Rate: |
N/A |
Product Details
| Weight |
30.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Minor Diameter |
Left Hand (CCW) |
| Shaft Type |
V2010-6F13S4S-11CC12L |
| Cover End RPM [Max |
1.5 |
| Shaft End Flow @ RPM |
Flange |
| Cover End Pressure [Max |
N/A |
| Controlled Flow Rate |
N/A |
| Rotation |
0.875 in |
| Displacement Shaft End (cu in/revolution) |
2.6 |
| Pilot Type |
V2010 |
| Pump Series |
1.3125 in |
| Max. RPM [Max |
Double |
| Port Type |
Buna-N |
| Minor Diameter [Min |
2400 |
| Seal Material |
0.728 in |
| Spline Description |
SAE B, 2 Bolt |
| Relief Valve Setting |
Single Shaft Seal |
| Model No. |
16/32 |
| Shaft Length |
3000 |
| Mounting Flange |
2400 |
| Major Diameter [Min |
N/A |
| Shaft End RPM [Max |
4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm |
| Shaft Dia. |
0.873 in |
| Port Size |
0.872 in |
| Shaft Key |
0.734 in |
| Mounting |
0.723 in |
| Shaft Seal Type |
N/A |
| Manufacturer Part No. |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
V2010-6F13S4S-11CC12L |
| Minor Diameter [Max |
2500 |
| Cover End Flow @ RPM |
2200 |
| GPM @ 1,800 rpm, Cover End |
6 |
| GPM @ 1,800 rpm, Shaft End |
19.5 |
| Integral Valve Configuration |
N/A |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Pressure Port Size, Cover End |
1/2 in SAE O-Ring |
| Pressure Port Size, Shaft End |
3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) |
0.8 |