2.953 Inch | 75 Millimeter x 4.528 Inch | 115 Millimeter x 0.787 Inch | 20 Millimeter SKF 7015 ACDGA/P4A Precision Ball Bearings
The online 2.953 Inch | 75 Millimeter x 4.528 Inch | 115 Millimeter x 0.787 Inch | 20 Millimeter SKF 7015 ACDGA/P4A Precision Ball Bearings BEARING MEXICO,S.A.DE C.V. parts store gives you 2.953 Inch | 75 Millimeter x 4.528 Inch | 115 Millimeter x 0.787 Inch | 20 Millimeter immediate access to 163 mm L a selection of more than 1.4 million new, used, remanufactured.
What is 7015 ACDGA/P4A bearing cross reference?
Brand Name: |
SKF |
Model Number: |
7015 ACDGA/P4A |
Manufacturer Part No.: |
45.0 LB |
Cover End RPM [Max: |
Flange Mount |
Mounting: |
Left Hand (CCW) |
Shaft Type: |
2520VQ12A5-11CC20LH |
Shaft Key: |
2.5 |
Weight: |
Flange |
Mounting Flange: |
N/A |
Minor Diameter: |
Standard Pilot |
Product Details
Manufacturer Part No. |
45.0 LB |
Cover End RPM [Max |
Flange Mount |
Mounting |
Left Hand (CCW) |
Shaft Type |
2520VQ12A5-11CC20LH |
Shaft Key |
2.5 |
Weight |
Flange |
Mounting Flange |
N/A |
Minor Diameter |
Standard Pilot |
Shaft End Flow @ RPM |
0.875 in |
Relief Valve Setting |
13 Tooth Splined |
Pilot Type |
2520VQ |
Cover End Pressure [Max |
1 3/8 in |
Seal Material |
Double |
Pump Series |
Buna-N |
Displacement Shaft End (cu in/revolution) |
2.5 |
Shaft End RPM [Max |
0.715 in |
Minor Diameter [Max |
SAE B, 2 Bolt |
Max. RPM [Max |
Single Shaft Seal |
Spline Description |
16/32 |
Port Size |
2700 |
Shaft Dia. |
2700 |
Cover End Flow @ RPM |
N/A |
Shaft End Pressure [Max |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Model No. |
0.873 in |
Port Type |
0.872 in |
Major Diameter [Max |
N/A |
Major Diameter [Min |
N/A |
Rotation |
N/A |
Minor Diameter [Min |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Shaft Length |
2520VQ12A5-11CC20LH |
Shaft Seal Type |
3000 |
Controlled Flow Rate |
3000 |
GPM @ 1,800 rpm, Cover End |
7.5 |
GPM @ 1,800 rpm, Shaft End |
18 |
Integral Valve Configuration |
w/o Integral Valves |
Port Orientation - Cover End |
Outlet 45° CW from Inlet |
Port Orientation - Shaft End |
Outlet Inline w/Inlet |
Pressure Port Size, Cover End |
3/4 in Flange |
Pressure Port Size, Shaft End |
1 in Flange |
Displacement Cover End (cu in/revolution) |
1.1 |