1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter SKF 5310MZZ Angular Contact Ball Bearings
1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter SKF 5310MZZ Angular Contact Ball Bearings Needs Analysis , 1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter SKF Bearing Manufacturing Service . Get Your BEARING MEXICO,S.A.DE C.V. 63.5 mm B - Cone Width Free.
What is 5310MZZ bearing cross reference？
| Brand Name: |
SKF |
| Model Number: |
5310MZZ |
| Max. RPM [Max: |
76.0 LB |
| Displacement Shaft End (cu in/revolution): |
5.96 |
| Port Size: |
Right Hand (CW) |
| Pilot Type: |
3525VQ30A12-11AA20 |
| Shaft End Pressure [Max: |
3 |
| Minor Diameter [Min: |
Flange |
| Port Type: |
N/A |
| Spline Description: |
Standard Pilot |
Product Details
| Max. RPM [Max |
76.0 LB |
| Displacement Shaft End (cu in/revolution) |
5.96 |
| Port Size |
Right Hand (CW) |
| Pilot Type |
3525VQ30A12-11AA20 |
| Shaft End Pressure [Max |
3 |
| Minor Diameter [Min |
Flange |
| Port Type |
N/A |
| Spline Description |
Standard Pilot |
| Weight |
1.25 in |
| Minor Diameter |
14 Tooth Splined |
| Shaft Type |
3525VQ |
| Shaft Key |
1 15/16 in |
| Rotation |
Buna-N |
| Seal Material |
2500 |
| Mounting |
1.04 in |
| Minor Diameter [Max |
SAE C, 2 Bolt |
| Shaft Dia. |
Single Shaft Seal |
| Major Diameter [Max |
12/24 |
| Mounting Flange |
2500 |
| Pump Series |
2500 |
| Cover End Pressure [Max |
N/A |
| Model No. |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Relief Valve Setting |
1.248 in |
| Shaft End Flow @ RPM |
1.247 in |
| Shaft End RPM [Max |
N/A |
| Manufacturer Part No. |
N/A |
| Cover End Flow @ RPM |
N/A |
| Major Diameter [Min |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Shaft Seal Type |
3525VQ30A12-11AA20 |
| Cover End RPM [Max |
3000 |
| Controlled Flow Rate |
3000 |
| Shaft Length |
18 |
| GPM @ 1,800 rpm, Shaft End |
45 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet Opposite Inlet |
| Pressure Port Size, Cover End |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
2.45 |