Hydraulic Gear Pump Tandem Pump 07400-40500 for Bulldozer D60
| Controlled Flow Rate: |
101.0 LB |
| Port Orientation - Cover End: |
Outlet 135° CW from Inlet |
| Minor Diameter [Max: |
Right Hand (CW) |
| Displacement Cover End (cu in/revolution): |
4.1 |
| Integral Valve Configuration: |
w/o Integral Valves |
| Shaft End Pressure [Max: |
2500 |
| Manufacturer Part No.: |
4525VQ60A21-11DD20 |
| Shaft End RPM [Max: |
Standard Pilot |
Product Details
| Controlled Flow Rate |
101.0 LB |
| Port Orientation - Cover End |
Outlet 135° CW from Inlet |
| Minor Diameter [Max |
Right Hand (CW) |
| Displacement Cover End (cu in/revolution) |
4.1 |
| Integral Valve Configuration |
w/o Integral Valves |
| Shaft End Pressure [Max |
2500 |
| Manufacturer Part No. |
4525VQ60A21-11DD20 |
| Shaft End RPM [Max |
Standard Pilot |
| Pressure Port Size, Shaft End |
1 1/2 in Flange |
| Minor Diameter [Min |
14 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End |
90 |
| Pressure Port Size, Cover End |
1 in Flange |
| Weight |
Double |
| Cover End Pressure [Max |
3000 |
| Relief Valve Setting |
N/A |
| Cover End Flow @ RPM |
1.04 in |
| GPM @ 1,800 rpm, Cover End |
31.5 |
| Spline Description |
Single Shaft Seal |
| Port Orientation - Shaft End |
Outlet 90° CW from Inlet |
| Major Diameter [Min |
2200 |
| Shaft End Flow @ RPM |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
11.8 |
| Major Diameter [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Cover End RPM [Max |
1.248 in |
| Mounting |
1.247 in |
| Mounting Flange |
N/A |
| Shaft Seal Type |
N/A |