CAT Excavator 320C S6K Engine Piston Kit 297-7795 With 102mm
| GPM @ 1,800 rpm, Shaft End: |
18.0 LB |
| Minor Diameter [Min: |
Flange Mount |
| Mounting Flange: |
Right Hand (CW) |
| Displacement Cover End (cu in/revolution): |
13 gal/min @ 1200 rpm |
| Shaft Seal Type: |
1.25 |
| Spline Description: |
NPT |
| Pressure Port Size, Shaft End: |
N/A |
| GPM @ 1,800 rpm, Cover End: |
12 |
| PDF |
|
Product Details
| GPM @ 1,800 rpm, Shaft End |
18.0 LB |
| Minor Diameter [Min |
Flange Mount |
| Mounting Flange |
Right Hand (CW) |
| Displacement Cover End (cu in/revolution) |
13 gal/min @ 1200 rpm |
| Shaft Seal Type |
1.25 |
| Spline Description |
NPT |
| Pressure Port Size, Shaft End |
N/A |
| GPM @ 1,800 rpm, Cover End |
12 |
| Major Diameter [Max |
13 gpm @ 1200 rpm |
| Port Orientation - Shaft End |
0.73 in |
| Shaft End RPM [Max |
11 Tooth Splined |
| Controlled Flow Rate |
19.5 gpm @ 1750 rpm |
| Integral Valve Configuration |
Priority Valve & Relief |
| Pressure Port Size, Cover End |
1 1/4 in |
| Relief Valve Setting |
Single |
| Minor Diameter [Max |
SAE-8 |
| Displacement Shaft End (cu in/revolution) |
Buna-N |
| Port Orientation - Cover End |
2400 |
| Cover End Pressure [Max |
2200 psi |
| Major Diameter [Min |
19 1/2 |
| Manufacturer Part No. |
P |
| Shaft End Pressure [Max |
SAE A, 2 Bolt |
| Cover End Flow @ RPM |
T |
| Weight |
1 |
| Cover End RPM [Max |
90° CW from Inlet |
| Mounting |
2.6 |
| Shaft End Flow @ RPM |
8 gal/min |
| Integral Valve Relief Setting |
750 psi |
| Shaft Code + Outlet Port Code |
38D |