D75A-1 D65S-6/7/8 D65A-6/8/11 Wheel Loader Hydraulic Gear Pump 07430-72203
| Pump Series: |
76.0 LB |
| Mounting: |
Flange Mount |
| Seal Material: |
Left Hand (CCW) |
| Minor Diameter: |
1.04 in |
| Max. RPM [Max: |
3 |
| Model No.: |
Flange |
| Weight: |
N/A |
| Pilot Type: |
Standard Pilot |
| PDF |
|
Product Details
| Pump Series |
76.0 LB |
| Mounting |
Flange Mount |
| Seal Material |
Left Hand (CCW) |
| Minor Diameter |
1.04 in |
| Max. RPM [Max |
3 |
| Model No. |
Flange |
| Weight |
N/A |
| Pilot Type |
Standard Pilot |
| Port Type |
1.25 in |
| Port Size |
14 Tooth Splined |
| Shaft Key |
3525VQ |
| Rotation |
1.9375 in |
| Shaft Type |
Double |
| Shaft Length |
Buna-N |
| Shaft Dia. |
2400 |
| Mounting Flange |
SAE C, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Spline Description |
12/24 |
| Cover End RPM [Max |
2500 |
| Shaft End RPM [Max |
2400 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
1.248 in |
| Major Diameter [Min |
1.247 in |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Manufacturer Part No. |
3525VQ38A21-11AA20-LH |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
31.5 |
| GPM @ 1,800 rpm, Shaft End |
57 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet Opposite Inlet |
| Pressure Port Size, Cover End |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
4.1 |
| Displacement Shaft End (cu in/revolution) |
7.4 |