HGP22A/HGP-22A 2 Stage Gear Pump HGP Hydraulic PUmp
| Displacement Cover End (cu in/revolution): |
30.0 LB |
| Port Type: |
Flange Mount |
| Seal Material: |
Right Hand (CW) |
| Integral Valve Configuration: |
V2010-1F9S5S-11AA12 |
| Shaft End Flow @ RPM: |
1 1/2 |
| Displacement Shaft End (cu in/revolution): |
Flange |
| Shaft End Pressure [Max: |
N/A |
| Cover End Pressure [Max: |
N/A |
| PDF |
|
Product Details
| Displacement Cover End (cu in/revolution) |
30.0 LB |
| Port Type |
Flange Mount |
| Seal Material |
Right Hand (CW) |
| Integral Valve Configuration |
V2010-1F9S5S-11AA12 |
| Shaft End Flow @ RPM |
1 1/2 |
| Displacement Shaft End (cu in/revolution) |
Flange |
| Shaft End Pressure [Max |
N/A |
| Cover End Pressure [Max |
N/A |
| Rotation |
0.875 in |
| Pressure Port Size, Cover End |
13 Tooth Splined |
| Minor Diameter |
V2010 |
| GPM @ 1,800 rpm, Shaft End |
1 5/16 in |
| Shaft Seal Type |
Buna-N |
| Mounting Flange |
2800 |
| Mounting |
0.728 in |
| GPM @ 1,800 rpm, Cover End |
SAE B, 2 Bolt |
| Shaft Type |
Single Shaft Seal |
| Max. RPM [Max |
16/32 |
| Spline Description |
3000 |
| Major Diameter [Min |
2800 |
| Cover End RPM [Max |
N/A |
| Model No. |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Relief Valve Setting |
0.873 in |
| Shaft Dia. |
0.872 in |
| Port Size |
0.7335 in |
| Port Orientation - Cover End |
0.7225 in |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max |
V2010-1F9S5S-11AA12 |
| Cover End Flow @ RPM |
2500 |
| Shaft Key |
2500 |
| Major Diameter [Max |
7.5 |
| Controlled Flow Rate |
13.5 |
| Weight |
N/A |
| Manufacturer Part No. |
Outlet 135° CCW from Inlet |
| Pilot Type |
Outlet Opposite Inlet |
| Pump Series |
1/2 in SAE O-Ring |
| Pressure Port Size, Shaft End |
3/4 in SAE O-Ring |
| Port Orientation - Shaft End |
1 |
| Shaft Length |
1.81 |