6Y3864 Gear transmission Pump Loader Hydraulic Pump for Replace Caterpillar
| Manufacturer Part No.: |
76.0 LB |
| Cover End RPM [Max: |
Flange Mount |
| GPM @ 1,800 rpm, Shaft End: |
Right Hand (CW) |
| Pressure Port Size, Shaft End: |
3525VQ35A21-11DD20 |
| Shaft Type: |
3 |
| Spline Description: |
Flange |
| Minor Diameter: |
N/A |
| Pump Series: |
Standard Pilot |
| PDF |
|
Product Details
| Manufacturer Part No. |
76.0 LB |
| Cover End RPM [Max |
Flange Mount |
| GPM @ 1,800 rpm, Shaft End |
Right Hand (CW) |
| Pressure Port Size, Shaft End |
3525VQ35A21-11DD20 |
| Shaft Type |
3 |
| Spline Description |
Flange |
| Minor Diameter |
N/A |
| Pump Series |
Standard Pilot |
| Shaft End Flow @ RPM |
1.25 in |
| Seal Material |
14 Tooth Splined |
| Pilot Type |
3525VQ |
| Controlled Flow Rate |
1.9375 in |
| Major Diameter [Max |
Buna-N |
| Max. RPM [Max |
2400 |
| Minor Diameter [Min |
1.04 in |
| Major Diameter [Min |
SAE C, 2 Bolt |
| Port Orientation - Cover End |
Single Shaft Seal |
| Shaft End Pressure [Max |
12/24 |
| Relief Valve Setting |
2500 |
| Shaft Key |
2400 |
| Model No. |
N/A |
| Port Type |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Mounting Flange |
1.248 in |
| Shaft Dia. |
1.247 in |
| Weight |
N/A |
| Shaft Length |
N/A |
| Cover End Pressure [Max |
N/A |
| Rotation |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Mounting |
3525VQ35A21-11DD20 |
| Shaft Seal Type |
3000 |
| Port Orientation - Shaft End |
3000 |
| Port Size |
31.5 |
| GPM @ 1,800 rpm, Cover End |
52.5 |
| Shaft End RPM [Max |
w/o Integral Valves |
| Integral Valve Configuration |
Outlet 135° CW from Inlet |
| Minor Diameter [Max |
Outlet 90° CW from Inlet |
| Cover End Flow @ RPM |
1 in Flange |
| Pressure Port Size, Cover End |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
4.12 |
| Displacement Shaft End (cu in/revolution) |
6.88 |