Transmission Hydraulic Gear Pump 1233472 /123-3472 for Caterpillar Wheel Loader
| Seal Material: |
15.0 LB |
| Port Orientation - Cover End: |
Flange Mount |
| Pump Series: |
Right Hand (CW) |
| Max. RPM [Max: |
1 |
| Model No.: |
NPT |
| Displacement Shaft End (cu in/revolution): |
N/A |
| Relief Valve Setting: |
20 |
| Cover End Flow @ RPM: |
4 gpm @ 1200 rpm |
Product Details
| Seal Material |
15.0 LB |
| Port Orientation - Cover End |
Flange Mount |
| Pump Series |
Right Hand (CW) |
| Max. RPM [Max |
1 |
| Model No. |
NPT |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Relief Valve Setting |
20 |
| Cover End Flow @ RPM |
4 gpm @ 1200 rpm |
| GPM @ 1,800 rpm, Cover End |
11 |
| Major Diameter [Min |
0.625 in |
| Displacement Cover End (cu in/revolution) |
9 Tooth Splined |
| Manufacturer Part No. |
6 gpm @ 1800 rpm |
| Shaft End Flow @ RPM |
V10 |
| Minor Diameter |
1 1/4 in |
| Rotation |
1/2 in NPT |
| Cover End Pressure [Max |
Buna-N |
| Pilot Type |
3400 |
| Shaft Length |
2500 psi |
| Cover End RPM [Max |
6 |
| Spline Description |
P |
| Integral Valve Configuration |
SAE A, 2 Bolt |
| Controlled Flow Rate |
P |
| Shaft Dia. |
1 |
| Port Orientation - Shaft End |
90° CCW from Inlet |
| GPM @ 1,800 rpm, Shaft End |
0.8 |
| Shaft Type |
w/o Integral Valves |
| Major Diameter [Max |
11B |