REXNORD ZT95215B Take Up Unit Bearings
QuestionREXNORD ZT95215B Take Up Unit Bearings ? Find what you 3510 lbf Basic Dynamic Radial Load Rating need BEARING MEXICO,S.A.DE C.V. faster 1.5625 in Width A by entering your REXNORD Bearing information .
What is ZT95215B bearing cross reference？
| Brand Name: |
REXNORD |
| Model Number: |
ZT95215B |
| GPM @ 1,800 rpm, Cover End: |
3/16 in |
| Pressure Port Size, Shaft End: |
Standard Blue Paint |
| Shaft End Pressure [Max: |
Axial Piston Pumps |
| Seal Material: |
PVM018 |
| Pump Series: |
33.0 LB |
| Pressure Port Size, Cover End: |
Right Hand (CW) |
| Port Orientation - Shaft End: |
PVM018ER02AE01AAA07000000A0A |
| Manufacturer Part No.: |
PVM018ER02AE01AAA07000000A0A |
Product Details
| GPM @ 1,800 rpm, Cover End |
3/16 in |
| Pressure Port Size, Shaft End |
Standard Blue Paint |
| Shaft End Pressure [Max |
Axial Piston Pumps |
| Seal Material |
PVM018 |
| Pump Series |
33.0 LB |
| Pressure Port Size, Cover End |
Right Hand (CW) |
| Port Orientation - Shaft End |
PVM018ER02AE01AAA07000000A0A |
| Manufacturer Part No. |
PVM018ER02AE01AAA07000000A0A |
| Major Diameter [Min |
Open Circuit Axial |
| Shaft Length |
1800 rpm |
| Integral Valve Configuration |
4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm |
| Port Orientation - Cover End |
SAE-20 |
| Relief Valve Setting |
0.75 in |
| Cover End Flow @ RPM |
3/4 |
| Shaft End Flow @ RPM |
Straight Keyed |
| Shaft End RPM [Max |
8.2 gpm @ 1750 rpm |
| Spline Description |
SAE-12 |
| Displacement Shaft End (cu in/revolution) |
Electric Motor Speeds |
| GPM @ 1,800 rpm, Shaft End |
Pressure Compensator |
| Minor Diameter [Max |
0.94 in |
| Minor Diameter [Min |
End Port |
| Cover End Pressure [Max |
Buna-N |
| Displacement Cover End (cu in/revolution) |
3.25 in |
| Controlled Flow Rate |
8.2 |
| Shaft Seal Type |
SAE A, 2 Bolt |
| Major Diameter [Max |
4 3/16 in |
| Max. RPM [Max |
Adjustable Maximum Displacement Stop & Single Shaft Seal |
| Minor Diameter |
SAE 19-1 |
| Mounting Flange |
918 |
| Cover End RPM [Max |
N/A |
| Peak Pressure [Max |
5000 |
| HP @ 1,800 rpm [Max |
22 hp |
| Auxiliary Mounting Pad |
Single Pump, Non-Thru-Drive |
| Displacement (in³/rev) |
1.1 |
| Torque @ 3000 psi [Max |
62 |
| Flow Compensator Setting |
None |
| Operating Pressure [Max |
5000 psi |
| Continuous Pressure [Max |
4000 |
| Intermittent Pressure [Max |
4600 |
| Pressure Compensator Setting |
70 Bar |