2.953 Inch | 75 Millimeter x 4 Inch | 101.6 Millimeter x 3.252 Inch | 82.6 Millimeter REXNORD ZA2075MM Pillow Block Bearings
Browse 2.953 Inch | 75 Millimeter x 4 Inch | 101.6 Millimeter x 3.252 Inch | 82.6 Millimeter REXNORD ZA2075MM Pillow Block Bearings Categories in the Manufacturers 2.953 Inch | 75 Millimeter x 4 Inch | 101.6 Millimeter x 3.252 Inch | 82.6 Millimeter Online Free. including REXNORD Bearing. BEARING MEXICO,S.A.DE C.V.
What is ZA2075MM bearing cross reference？
| Brand Name: |
REXNORD |
| Model Number: |
ZA2075MM |
| Relief Valve Setting: |
45.0 LB |
| Pressure Port Size, Cover End: |
3/4 in Flange |
| GPM @ 1,800 rpm, Cover End: |
16.5 |
| Mounting Flange: |
2520VQ17A11-11AA20-LH |
| Port Orientation - Cover End: |
Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End: |
Outlet Opposite Inlet |
| Spline Description: |
N/A |
| Controlled Flow Rate: |
Standard Pilot |
Product Details
| Relief Valve Setting |
45.0 LB |
| Pressure Port Size, Cover End |
3/4 in Flange |
| GPM @ 1,800 rpm, Cover End |
16.5 |
| Mounting Flange |
2520VQ17A11-11AA20-LH |
| Port Orientation - Cover End |
Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet Opposite Inlet |
| Spline Description |
N/A |
| Controlled Flow Rate |
Standard Pilot |
| Displacement Cover End (cu in/revolution) |
2.22 |
| Minor Diameter [Min |
13 Tooth Splined |
| Minor Diameter [Max |
2520VQ |
| Integral Valve Configuration |
w/o Integral Valves |
| Cover End Pressure [Max |
Buna-N |
| Major Diameter [Min |
2500 |
| Pressure Port Size, Shaft End |
1 in Flange |
| Cover End RPM [Max |
SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End |
25.5 |
| Manufacturer Part No. |
16/32 |
| Shaft End Flow @ RPM |
2700 |
| Seal Material |
2500 |
| Minor Diameter |
N/A |
| Max. RPM [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max |
0.873 in |
| Shaft Seal Type |
0.872 in |
| Shaft End Pressure [Max |
3000 |
| Cover End Flow @ RPM |
N/A |
| Pump Series |
N/A |
| Shaft Length |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
3.37 |
| Major Diameter [Max |
3000 |