2.938 Inch | 74.625 Millimeter x 4.531 Inch | 115.09 Millimeter x 3.5 Inch | 88.9 Millimeter REXNORD MP6215 Pillow Block Bearings
What is 2.938 Inch | 74.625 Millimeter x 4.531 Inch | 115.09 Millimeter x 3.5 Inch | 88.9 Millimeter REXNORD MP6215 Pillow Block Bearings in 390 Limiting Speed Rating (r/min): mechanical engineering? REXNORD Bearing BEARING MEXICO,S.A.DE C.V. 2.938 Inch | 74.625 Millimeter x 4.531 Inch | 115.09 Millimeter x 3.5 Inch | 88.9 Millimeter Manufacturing Service . Upload your CAD file for an instant.
What is MP6215 bearing interchange?
Brand Name: |
REXNORD |
Model Number: |
MP6215 |
Displacement Cover End (cu in/revolution): |
Piston Pumps |
Minor Diameter: |
PVB20 |
Controlled Flow Rate: |
57.0 LB |
Integral Valve Configuration: |
Flange Mount |
Minor Diameter [Min: |
Right Hand (CW) |
GPM @ 1,800 rpm, Shaft End: |
PVB20-RS-20-CG 20-S30 |
Major Diameter [Max: |
SAE |
Displacement Shaft End (cu in/revolution): |
Variable Displacement Open Circuit |
Product Details
Displacement Cover End (cu in/revolution) |
Piston Pumps |
Minor Diameter |
PVB20 |
Controlled Flow Rate |
57.0 LB |
Integral Valve Configuration |
Flange Mount |
Minor Diameter [Min |
Right Hand (CW) |
GPM @ 1,800 rpm, Shaft End |
PVB20-RS-20-CG 20-S30 |
Major Diameter [Max |
SAE |
Displacement Shaft End (cu in/revolution) |
Variable Displacement Open Circuit |
Cover End Flow @ RPM |
SAE-8 |
Manufacturer Part No. |
20 |
Max. RPM [Max |
SAE-20 |
Cover End RPM [Max |
1.25 in |
Port Orientation - Cover End |
Straight w/ Key |
Shaft Length |
20 / 1750 |
Mounting Flange |
SAE-20 |
Pressure Port Size, Shaft End |
Single Shaft |
Minor Diameter [Max |
Pressure Compensator |
Shaft End Pressure [Max |
Side Port |
Seal Material |
Buna-N |
Shaft End Flow @ RPM |
1800 |
Relief Valve Setting |
3000 psi |
Major Diameter [Min |
20 |
GPM @ 1,800 rpm, Cover End |
SAE C, 2 Bolt |
Shaft Seal Type |
N/A |
Pressure Port Size, Cover End |
Variable |
Cover End Pressure [Max |
One Side of Center |
Pump Series |
PVB20-RS-20-CG 20-S30 |
Spline Description |
Extra Drain Port for Vertical Mounting |
Port Orientation - Shaft End |
2.61 |
Shaft End RPM [Max |
3000 psi |
Pressure Adjustment [Min |
250 psi |
Pressure Compensator Variation |
Remotely Adjustable Pressure Setting |
Maximum Displacement Adjustment |
No |