3 Inch | 76.2 Millimeter x 4 Inch | 101.6 Millimeter x 3.125 Inch | 79.38 Millimeter REXNORD MEP2300AC Pillow Block Bearings
Question3 Inch | 76.2 Millimeter x 4 Inch | 101.6 Millimeter x 3.125 Inch | 79.38 Millimeter REXNORD MEP2300AC Pillow Block Bearings BEARING MEXICO,S.A.DE C.V. ? Find what 3 Inch | 76.2 Millimeter x 4 Inch | 101.6 Millimeter x 3.125 Inch | 79.38 Millimeter you need faster by entering your REXNORD Bearing information .
What is MEP2300AC bearing cross reference？
| Brand Name: |
REXNORD |
| Model Number: |
MEP2300AC |
| Shaft Length: |
32.0 LB |
| Cover End Pressure [Max: |
Flange Mount |
| Minor Diameter [Max: |
Right Hand (CW) |
| Port Orientation - Cover End: |
25VQ12A-11A20 |
| Controlled Flow Rate: |
1 1/2 |
| Displacement Shaft End (cu in/revolution): |
Flange |
| Mounting Flange: |
N/A |
| Shaft Seal Type: |
20 |
Product Details
| Shaft Length |
32.0 LB |
| Cover End Pressure [Max |
Flange Mount |
| Minor Diameter [Max |
Right Hand (CW) |
| Port Orientation - Cover End |
25VQ12A-11A20 |
| Controlled Flow Rate |
1 1/2 |
| Displacement Shaft End (cu in/revolution) |
Flange |
| Mounting Flange |
N/A |
| Shaft Seal Type |
20 |
| Displacement Cover End (cu in/revolution) |
12 gpm @ 1200 rpm |
| Minor Diameter [Min |
11 |
| Spline Description |
0.875 in |
| Pressure Port Size, Shaft End |
13 Tooth Splined |
| Shaft End Pressure [Max |
18 gpm @ 1800 rpm |
| Pressure Port Size, Cover End |
25VQ |
| Major Diameter [Min |
1 3/8 in |
| Relief Valve Setting |
None |
| Port Orientation - Shaft End |
1 in Flange |
| GPM @ 1,800 rpm, Shaft End |
Buna-N |
| GPM @ 1,800 rpm, Cover End |
2700 |
| Integral Valve Configuration |
3000 psi |
| Shaft End RPM [Max |
18 |
| Seal Material |
A |
| Major Diameter [Max |
SAE B, 2 Bolt |
| Max. RPM [Max |
Single Shaft Seal |
| Minor Diameter |
Opposite Inlet Port |
| Cover End Flow @ RPM |
25VQ12A-11A20 |
| Cover End RPM [Max |
2.45 |
| Manufacturer Part No. |
w/o Integral Valves |