| Port Size |
76.0 LB |
| Shaft Type |
Flange Mount |
| Relief Valve Setting |
Right Hand (CW) |
| Shaft Dia. |
3525VQ25A21-11CC20 |
| Cover End Pressure [Max |
3 |
| Rotation |
Flange |
| Major Diameter [Min |
N/A |
| Mounting |
Standard Pilot |
| Pilot Type |
1.25 in |
| Major Diameter [Max |
14 Tooth Splined |
| Integral Valve Configuration |
3525VQ |
| Displacement Cover End (cu in/revolution) |
1.9375 in |
| Shaft End Pressure [Max |
Buna-N |
| Pump Series |
2500 |
| Port Orientation - Cover End |
1.04 in |
| Minor Diameter |
SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| Shaft Seal Type |
12/24 |
| Shaft Key |
2500 |
| Cover End RPM [Max |
2500 |
| Minor Diameter [Min |
N/A |
| Displacement Shaft End (cu in/revolution) |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
1.248 in |
| Seal Material |
1.247 in |
| Shaft Length |
N/A |
| Port Type |
N/A |
| Weight |
N/A |
| Minor Diameter [Max |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
3525VQ25A21-11CC20 |
| Shaft End Flow @ RPM |
3000 |
| Spline Description |
3000 |
| Port Orientation - Shaft End |
31.5 |
| Max. RPM [Max |
37.5 |
| Pressure Port Size, Cover End |
w/o Integral Valves |
| Pressure Port Size, Shaft End |
Outlet 45° CW from Inlet |
| Mounting Flange |
Outlet Inline w/Inlet |
| Model No. |
1 in Flange |
| Cover End Flow @ RPM |
1 1/4 in Flange |
| Controlled Flow Rate |
4.12 |
| Shaft End RPM [Max |
4.98 |