REXROTH DBW30B1-5X/200-6EG24N9K4/V Valves
| Brand Name: | REXROTH |
| Model Number: | DBW30B1-5X/200-6EG24N9K4/V |
| Max. RPM [Max: | N/A |
| Pilot Type: | N/A |
| Minor Diameter [Min: | Piston Pumps |
| Integral Valve Configuration: | PVH |
| Model No.: | 0.0 LB |
| GPM @ 1,800 rpm, Cover End: | Right Hand (CW) |
| Pressure Port Size, Shaft End: | Flange |
| Minor Diameter: | Variable Displacement Open Circuit |
Product Details
| Max. RPM [Max | N/A |
| Pilot Type | N/A |
| Minor Diameter [Min | Piston Pumps |
| Integral Valve Configuration | PVH |
| Model No. | 0.0 LB |
| GPM @ 1,800 rpm, Cover End | Right Hand (CW) |
| Pressure Port Size, Shaft End | Flange |
| Minor Diameter | Variable Displacement Open Circuit |
| Cover End Pressure [Max | #8 SAE O-Ring Port - Bottom (Top Plugged) |
| Port Size | 2 in 4-Bolt Flange/Code 61 |
| Port Orientation - Shaft End | N/A |
| Mounting Flange | 14 Tooth Splined |
| Shaft Key | 26 gpm @ 1800 rpm |
| Cover End RPM [Max | 1 in 4-Bolt Flange/Code 61 |
| Controlled Flow Rate | Pressure Compensator |
| Weight | 1.89 in |
| Port Type | Side Port |
| Major Diameter [Max | Viton |
| Minor Diameter [Max | None |
| Shaft End RPM [Max | 26 |
| Mounting | SAE C, 4 Bolt |
| GPM @ 1,800 rpm, Shaft End | Q250 Valve Plate, No Case To Inlet Check Valve |
| Displacement Cover End (cu in/revolution) | 14 Tooth Splined |
| Shaft Type | No Auxiliary Mounting Features |
| Displacement Shaft End (cu in/revolution) | 3.5 |
| Spline Description | None |
| Shaft End Pressure [Max | None |
| Relief Valve Setting | 3625 |
| Major Diameter [Min | 957-1,073 psi |
| Shaft Seal Type | Standard Displacement |