| Port Orientation - Cover End |
76.0 LB |
| Weight |
Flange Mount |
| Shaft End Pressure [Max |
Left Hand (CCW) |
| Controlled Flow Rate |
3525VQ30A12-11AA20-LH |
| Minor Diameter [Max |
3 |
| Relief Valve Setting |
Flange |
| Rotation |
N/A |
| Model No. |
Standard Pilot |
| Displacement Shaft End (cu in/revolution) |
1.25 in |
| Shaft End Flow @ RPM |
14 Tooth Splined |
| Mounting |
3525VQ |
| Shaft Seal Type |
1.9375 in |
| Cover End Flow @ RPM |
Buna-N |
| Seal Material |
2500 |
| Displacement Cover End (cu in/revolution) |
1.04 in |
| Pressure Port Size, Cover End |
SAE C, 2 Bolt |
| Shaft Key |
Single Shaft Seal |
| Port Type |
12/24 |
| Port Size |
2500 |
| Cover End RPM [Max |
2500 |
| Cover End Pressure [Max |
N/A |
| Shaft Length |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Type |
1.248 in |
| Shaft Dia. |
1.247 in |
| Integral Valve Configuration |
N/A |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Major Diameter [Max |
N/A |
| Mounting Flange |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Minor Diameter [Min |
3525VQ30A12-11AA20-LH |
| Minor Diameter |
3000 |
| Spline Description |
3000 |
| Port Orientation - Shaft End |
18 |
| Manufacturer Part No. |
45 |
| GPM @ 1,800 rpm, Cover End |
w/o Integral Valves |
| Shaft End RPM [Max |
Outlet 135° CCW from Inlet |
| Major Diameter [Min |
Outlet Opposite Inlet |
| Max. RPM [Max |
1 in Flange |
| Pilot Type |
1 1/4 in Flange |
| Pressure Port Size, Shaft End |
2.45 |
| Pump Series |
5.96 |