6128-52-1013 Oil Pump for Excavator Engine 6D155 Lubricating Oil System
| Major Diameter [Max: |
45.0 LB |
| Port Size: |
Flange Mount |
| Max. RPM [Max: |
Left Hand (CCW) |
| Seal Material: |
2520VQ21A14-1DB20LH |
| GPM @ 1,800 rpm, Shaft End: |
2 1/2 |
| Major Diameter [Min: |
Flange |
| Minor Diameter: |
3/16 in |
| Shaft End Pressure [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Major Diameter [Max |
45.0 LB |
| Port Size |
Flange Mount |
| Max. RPM [Max |
Left Hand (CCW) |
| Seal Material |
2520VQ21A14-1DB20LH |
| GPM @ 1,800 rpm, Shaft End |
2 1/2 |
| Major Diameter [Min |
Flange |
| Minor Diameter |
3/16 in |
| Shaft End Pressure [Max |
Standard Pilot |
| Pressure Port Size, Shaft End |
0.875 in |
| Weight |
Straight w/ Key |
| Cover End Pressure [Max |
2520VQ |
| Shaft End RPM [Max |
1.9375 in |
| Port Type |
Buna-N |
| Manufacturer Part No. |
2500 |
| Pilot Type |
N/A |
| Displacement Shaft End (cu in/revolution) |
SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| Integral Valve Configuration |
N/A |
| Pressure Port Size, Cover End |
2700 |
| Shaft End Flow @ RPM |
2500 |
| Displacement Cover End (cu in/revolution) |
N/A |
| Minor Diameter [Min |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Shaft Dia. |
N/A |
| Shaft Type |
N/A |
| Controlled Flow Rate |
N/A |
| Minor Diameter [Max |
N/A |
| Cover End RPM [Max |
N/A |
| Mounting |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Key |
2520VQ21A14-1DB20LH |
| Mounting Flange |
2000 |
| Rotation |
3000 |
| Cover End Flow @ RPM |
21 |
| Model No. |
31.5 |
| Relief Valve Setting |
w/o Integral Valves |
| Spline Description |
Outlet 45° CCW from Inlet |
| Shaft Length |
Outlet 90° CW from Inlet |
| Port Orientation - Shaft End |
3/4 in Flange |
| Shaft Seal Type |
1 in Flange |
| Pump Series |
2.8 |
| Port Orientation - Cover End |
4.12 |