CBN-E320/CBN-F320 Aluminum Hydraulic Gear Pump Group for Tractor Harvester
Integral Valve Configuration: | 30.0 LB |
Controlled Flow Rate: | Flange Mount |
Seal Material: | Right Hand (CW) |
Shaft Length: | V2010-1F13S6S-1CC12 |
Major Diameter [Min: | 1 1/2 |
Spline Description: | Flange |
Major Diameter [Max: | 3/16 in |
Displacement Shaft End (cu in/revolution): | N/A |
PDF |
|
Product Details
Integral Valve Configuration | 30.0 LB |
Controlled Flow Rate | Flange Mount |
Seal Material | Right Hand (CW) |
Shaft Length | V2010-1F13S6S-1CC12 |
Major Diameter [Min | 1 1/2 |
Spline Description | Flange |
Major Diameter [Max | 3/16 in |
Displacement Shaft End (cu in/revolution) | N/A |
GPM @ 1,800 rpm, Cover End | 0.875 in |
Port Type | Straight w/ Key |
Mounting Flange | V2010 |
Pilot Type | 2 5/16 in |
GPM @ 1,800 rpm, Shaft End | Buna-N |
Port Size | 2400 |
Minor Diameter [Min | N/A |
Relief Valve Setting | SAE B, 2 Bolt |
Shaft End RPM [Max | Single Shaft Seal |
Pressure Port Size, Cover End | N/A |
Shaft End Pressure [Max | 3000 |
Minor Diameter [Max | 2400 |
Shaft Type | N/A |
Pressure Port Size, Shaft End | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
Port Orientation - Cover End | N/A |
Port Orientation - Shaft End | N/A |
Pump Series | N/A |
Minor Diameter | N/A |
Shaft Dia. | N/A |
Cover End RPM [Max | 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
Manufacturer Part No. | V2010-1F13S6S-1CC12 |
Max. RPM [Max | 2200 |
Shaft Key | 2200 |
Rotation | 9 |
Shaft End Flow @ RPM | 19.5 |
Displacement Cover End (cu in/revolution) | N/A |
Cover End Flow @ RPM | Outlet 45° CW from Inlet |
Weight | Outlet Inline w/Inlet |
Model No. | 1/2 in SAE O-Ring |
Mounting | 3/4 in SAE O-Ring |
Shaft Seal Type | 1.19 |
Cover End Pressure [Max | 2.59 |